Pioneer Pro Anchoring Epoxy ​​240ml

A two-component high-strength structural adhesive, dispensed via an ordinary cailking gun. It is designed for bonding threaded rod and reinforcing dowelling bars into drilled holes, in solid concrete materials.

​

​​Applications

Anchoring threaded rod and rebar to concrete and masonry

Directions for use

1. Use recommended heavy duty professional caulking gun.
2. Remove plastic plug from cartridge. Save this for closing of cartridge if needed.
3. Attach mixing nozzle to the cartridge.
4. On an separate dish or container, gun a small amount of epoxy until a uniform color is achieved. Note: Use only within the specied potlife period. Mixing nozzle will harden if unused after this period. Discard and replace if necessary.
5. Dispense the epoxy at the bottom of the hole while withdrawing the nozzle. Fill only about 5/8 of the hole so that once the threaded rod or bar is inserted, the hole becomes completely led up.
6. Insert threaded rod or rebar at the bottom of the hole while turning clockwise.
7. Remove excess material.
8. Leave anchor undisturbed for 4 hours, or longer for lower temperatures.